How to Program Hyundai Key Fob

Programming a Hyundai key fob yourself can save you time and money compared to going to a dealership for the same service. Key fobs provide convenience and ensure added security by enabling remote locking, unlocking, and trunk opening functions.

How to Program Hyundai Key Fob

This guide on how to program hyundai key fob aims to walk you through the straightforward process of programming your Hyundai key fob at home. Whether you’re setting up a new fob or reprogramming an existing one, following these steps will help you successfully program your key fob in no time.

Why Program Your Hyundai Key Fob Yourself?

Convenience:

Programming a key fob yourself means you can do it at any time that suits you without having to make an appointment or wait at a dealership.

Cost-saving:

Dealerships typically charge a fee for key fob programming, which can be expensive. By doing it yourself, you can save money and put those funds towards other car maintenance needs.

Easy Process:

Programming a Hyundai key fob is a straightforward process that does not require any technical expertise. With the right instructions and equipment, anyone can successfully program their key fob in just a few simple steps.

Equipment Needed

Your Hyundai Vehicle:

You will need to have your Hyundai vehicle present during the programming process as it is an essential part of the process.

Key Fob:

Programming a Hyundai Key Fob Yourself Can Save You Time

This guide is specific to Hyundai key fobs, so make sure you have the correct one for your car model. It’s always a good idea to have a spare key fob in case of emergencies.

Pin or Paper Clip:

To access the programming button on your vehicle, you will need a pin or paper clip. These are readily available household items that can be used in place of a specialized tool.

8 Simple Methods on How to Program Hyundai Key Fob

Method 1: Programming from the Driver’s Seat

  1. Start by sitting in the driver’s seat of your Hyundai vehicle and close all doors.
  2. Press and hold the “Lock” button on your key fob while simultaneously turning the key to “On” position, which will activate the car’s accessories without starting the engine.
  3. Release both buttons, and you’ll hear a chime confirming that the programming mode is active.
  4. Within 30 seconds, press and release the “Lock” button on your key fob twice.
  5. You should hear another chime indicating the successful programming of your key fob.
  6. Turn off the ignition and remove the key to exit programming mode. Test your key fob to ensure it’s working correctly.
A Hyundai Key Fob is a Straightforward Process

Method 2: Using Your Car’s Ignition:

  1. Sit inside your vehicle with all doors closed and insert the key into the ignition.
  2. Turn the key to the “On” position without starting the car, and then immediately turn it back to the “Off” position.
  3. Repeat this process three times within 10 seconds, ending with the key in the “Off” position.
  4. Within five seconds of completing the previous step, press and hold both the “Lock” and “Unlock” buttons on your key fob simultaneously for a few seconds.
  5. You’ll hear another chime indicating successful programming of your key fob. Test it to ensure it’s working correctly.

Method 3: Manually Program Your Key Fob:

  1. Insert your key into the ignition and turn it to “On.”
  2. Press and hold the “Unlock” button on your driver’s side door.
  3. While holding the “Unlock” button, press and release the “Lock” button on your key fob three times.
  4. Release both buttons simultaneously, and you’ll hear a chime indicating the successful programming of your key fob.
  5. Test it to ensure it’s working correctly.

Method 4: Using Your Hyundai’s Valet Button:

  1. Locate the valet or override switch under your steering wheel, which is typically located near the fuse box.
  2. Flip the switch to the “Off” position for five seconds, then back to its original position (usually back in).
  3. Within five seconds, press and hold the “Lock” button on your key fob.
  4. You’ll hear a chime indicating the successful programming of your key fob.
  5. Test it to ensure it’s working correctly.

Method 5: Programming Your Key Fob with a PIN:

  1. Insert your Hyundai vehicle’s ignition key into the door lock on the driver’s side.
  2. Turn the key clockwise to unlock the door, then counterclockwise back to its original position.
  3. Repeat this process three times within five seconds, ending with the key in its original position (counterclockwise).
  4. Once completed, press and release both buttons on your key fob simultaneously.
  5. You’ll hear a chime indicating successful programming of your key fob. Test it to ensure it’s working correctly.
Vehicle With All Doors Closed and Insert the Key

Method 6: Programming with an Existing Working Key Fob:

  1. Start by inserting your existing, working key fob into the ignition and turning it to an “On” position without starting the car.
  2. Within five seconds, press and release the “Lock” button on your existing key fob.
  3. Then, insert your new key fob into the ignition and turn it to the “On” position within 10 seconds of completing step two.
  4. Within another 10 seconds, press and release the “Lock” button on your new key fob.
  5. You’ll hear a chime confirming the successful programming of your new key fob. Test it to ensure it’s working correctly.

Method 7: Programming with an Existing Master Key:

  1. Insert your existing master key into the ignition and turn it to the “On” position without starting the car.
  2. Within five seconds, press and release the “Lock” button on your master key.
  3. Then, insert your new key into the ignition and turn it to the “On” position within 10 seconds of completing step two.
  4. As quickly as possible (within three seconds), press and release the “Lock” button on your new key.
  5. You’ll hear a chime confirming the successful programming of your new key. Test it to ensure it’s working correctly.

Method 8: Programming with an Existing Key Fob and Valet Button:

  1. Start by inserting your existing key fob into the ignition and turning it to an “On” position without starting the car.
  2. Within five seconds, press and release the “Lock” button on your existing key fob twice.
  3. Within another five seconds, turn the valet switch from its original position (usually back in) to its other position (usually out).
  4. You’ll hear a chime indicating the successful programming of your key fob.
  5. Test it to ensure it’s working correctly.

Following these methods will help you successfully program your Hyundai key fob in a matter of minutes. It’s always a good idea to have at least one spare key fob in case of emergencies, so make sure to keep this guide on how to program hyundai key fob handy for future reference. If you encounter any difficulties or have any questions, consult your vehicle’s owner’s manual or contact your nearest Hyundai dealership for assistance.

Additional Tips

Keep Spare Batteries:

Always have spare batteries available for your key fob. A weak or dead battery is often the culprit behind key fob issues and can thwart the programming process if not replaced in time.

Maintain Security:

If you suspect your key fob has been lost or stolen, immediately reprogram it and delete the previous key from your vehicle’s memory to avoid any security risks.

Seek Professional Assistance:

If you encounter difficulties with programming your key fob, it’s always best to seek professional assistance from a certified Hyundai technician. They will have the necessary tools and knowledge to help you troubleshoot any issues.  So, don’t hesitate to reach out for help if needed!

As advancements in technology continue to make life easier, knowing how to program your key fob can save you time and money in the long run.

Turn the Key Clockwise to Unlock the Door

Frequently Asked Questions

Q: Can I Program My Key Fob Without Going to the Dealership?

A: Yes, you can easily program your Hyundai key fob at home using one of the methods mentioned in this guide. You do not have to go to the dealership for this task.

Q: Can I Program My Key Fob If I Only Have One?

A: Yes, you can still program your key fob if you only have one, as long as it’s a working key fob. Follow one of the methods mentioned above to program your single key fob.

Q: Will Programming My Key Fob Erase Other Existing Remote Controls?

A: No, programming a new key fob will not erase other existing remote controls. All programmed remotes will continue to function properly.

Conclusion

Programming your Hyundai key fob is a simple process that can be done at home with these easy methods. However, if you encounter any issues or have trouble following these steps on how to program hyundai key fob, it’s always best to consult your owner’s manual or reach out to a professional for assistance.

With a properly programmed key fob, you can conveniently lock and unlock your car from a distance and ensure the safety of your vehicle. Keep in mind that not all methods may work for every type of key fob or vehicle model, so it’s essential

Leave a Comment