Door locks are necessary for most homes, but they can also be a nuisance. For example, if you have small children, you know the frustration of trying to get them out the door when they can’t remember how to unlock the knob. Or, if you have a dog that likes to run out the door, you may need to keep it locked during certain times of the day.
But what do you do when you need to get out in a hurry and don’t have your key? The answer is to remove the safety first door handle lock. It’s easy to do and only takes a few minutes. Read on for instructions on how to remove the safety first door handle lock.
What Is a Safety First Door Handle Lock?
A safety-first door handle lock is a device installed inside a door near the handle. The purpose of the device is to prevent the door from being opened from the outside in an emergency such as a fire.
The lock is activated by a lever or knob located on the inside of the door and can only be released from the outside by breaking the glass. This type of lock is commonly found in apartment buildings, office buildings, and hotels.
Why It’s Important to Remove Safety First Door Handle Lock?
A safety-first door handle lock is an important tool that can help keep your family safe. It is installed on the inside of your door to easily see if someone is trying to enter your home without your permission. It is important to remove the safety first door handle lock because it can be used to burglarize your home.
If you have a safety-first door handle lock and a burglar knows about it, they can use a screwdriver or other tool to remove the screws from the door handle. This will allow them to enter your home without your permission.
In addition, if you have a safety-first door handle lock, and you forget to remove it before you leave your home, a burglar can easily enter your home and take whatever they want.
Required Materials
- A paperclip
- A flat-head screwdriver
- Allen wrench
- WD40 or Gun Oil
- Needle Nose Pliers
How to Remove Safety First Door Handle Lock Step by Step Guide
Step 1: Remove the Screws
Using a Phillips head screwdriver, remove the screws holding the door handle in place. There should be two screws, one on the inside of the handle and one on the outside.
Step 2: Remove the Handle
Once the screws have been removed, you should be able to pull the handle off of the door. If it is stuck, you may need to use a flathead screwdriver to pry it off.
Step 3: Remove the Lock
There will be a small metal plate on the inside of the door where the handle was attached. This is the door lock. Remove this plate by unscrewing the two screws holding it in place.
Step 4: Replace the Handle and Lock(Optional)
To reassemble, reverse the steps. Screw the door lock back into place, then attach the handle. Ensure that the screws are tight so that the handle will not come off easily.
Step 5: Test the Lock(Optional)
Before putting the screws back in, test the lock to ensure it is working properly. Open and close the door a few times to ensure that the handle stays in place and that the lock engages correctly. Screw the screws back into place, and you should be all set!
Now that you know how to remove the safety first door handle lock, you can easily get in and out of your home in an emergency. If you have small children, this will be a lifesaver!
Some Other Consideration Things
- If you are still having trouble removing the lock, you may need WD40 or gun oil to help loosen the screws.
- If the screws are stripped, you may need to use a flat head screwdriver to remove them.
- If the door handle is stuck, you may need to use needle-nose pliers to remove it.
- If you are replacing the door handle, make sure that the new one is compatible with the safety-first door handle lock.
- Make sure to test the lock before putting the screws back in to ensure that it is working properly.
How Do You Disassemble a Safety First Door Handle Lock
Disassembling a Safety First Door Handle Lock is a simple process that can be completed in just a few minutes.
The first step is to remove the two screws that secure the lock to the door. Once the screws have been removed, the lock can be lifted off the door. With the lock removed, you will see the mechanism that keeps it in place.
The next step is to remove the pin that secures the mechanism. Once the pin has been removed, the mechanism can be pulled out of the lock body.
Finally, the last step is to remove the spring which helps to keep the lock in the locked position. With the spring removed, the lock can be reassembled and placed back on the door. Keep reading for more information about how to remove the safety first door handle lock.
Removal Procedure for Safety First Lever Handle Lock with Adhesive of a Door
Removal Procedures for Safety First Lever Handle Lock with Adhesive of a Door is addressed below:
1. Using a sharp, thin blade or razor, carefully cut along the perimeter of the adhesive to loosen it from the door surface. Be careful not to scratch or damage the door surface when cutting.
2. Carefully pull back the adhesive from the door surface.
3. Using a small screwdriver, carefully unscrew the two screws that attach the lock to the door knob or handle on either side of the door.
4. Carefully remove any remaining adhesive residue from both sides of the door using a damp cloth or paper towel and rubbing alcohol. Repeat as necessary until all residue has been removed.
5. Carefully remove the lock from the door knob or handle and discard it.
6. To reinstall a new lock, first, attach it to the door knob or handle with screws provided with the product, then apply adhesive on both sides of the lock to secure it in place. Allow the adhesive to dry before testing the lock.
7. Test the lock to ensure it is properly locked and unlocked with the lever handle and that it is secure on both sides of the door frame.
8. Please refer to product instructions for further details if any adjustments are needed.
Following this removal procedure will ensure that your Safety First Lever Handle Lock with Adhesive is securely and properly removed from your door. Please take caution when completing these steps, as improper use of tools or mishandling may cause damage to the lock and door.
Once the lock has been successfully removed, you can then install a new lever handle on your door.
Can You Remove a Safety Door Handle Lock?
Most people know that you can’t just go and remove a safety door handle lock. However, many people don’t realize that with the right tools and a little bit of know-how, it is possible to remove a safety door handle lock without damaging the door. So, if you’ve been wondering how to remove a safety door handle lock, read on for some helpful tips.
First, it’s important to note that there are two different types of safety door handle locks: those mounted on the inside of the door and those mounted on the outside of the door.
If you’re trying to remove a lock mounted on the inside of the door, you’ll need to use a screwdriver to remove the two screws that hold the lock in place.
If you’re trying to remove a lock mounted on the outside of the door, you’ll need to use a drill to remove the three screws that hold the lock in place.
Once you’ve removed the screws, you should be able to pull the lock out of the door.
If you find that the lock is still firmly in place, you may need a hammer to tap it out of the door gently.
Frequently Asked Question
What Are Lever Handle Locks?
Lever handle locks are a type of door handle lock that uses a lever instead of a key to unlock the door. They are often used on commercial doors because they are more difficult to pick than traditional doorknobs.
How Do I Remove an Internal Door Handle?
There is a small screw at the base of the handle that needs to be removed. Once this is done, the handle can be pulled out and replaced.
How Much Does It Cost to Install a Safety First Door Handle Lock?
The cost to install a Safety First door handle lock can vary depending on the model you choose. However, most models cost around $30-$50.
Are Safety First Door Handle Lock Worth It?
The answer to this question depends on your personal security needs and how much you are willing to spend on security features. For example, safety First door handle locks offer a high level of security, but they can be expensive. If you are looking for a more affordable option, you may want to consider a different type of lock.
You Can Check It Out to Remove Safety First Door Knob Cover
Conclusion
Now that you know how to remove safety first door handle lock don’t be afraid to try it out on your own. Remember, practice makes perfect! If you’re still feeling uneasy about attempting this project on your own, feel free to reach out to a professional for help.
You can also read it: How to Break a Small Lock
3 thoughts on “How to Remove Safety First Door Handle Lock”